The CTS-1002 is a light-weight instrument with excellent performance which accumulates the experiences of 50 years for making ultrasonic instruments. This instrument is EN 12668:2000 compliance and has an industrial-leveled TFT display with full WVGA(800×480) resolution providing superior visibility in all lighting conditions including direct sunshine.
公司名稱：深圳華清儀器儀表有限公司
公司電話：0755－28199550、29806349
公司傳真：0755－29806349
熱線電話：13554848522
Q Q:540214533 394688981
址:http://www.huaqing17.cn
CTS-1002Weighing only 0.9kg square wave excitation full WVGA resolution TFT display and strong flaw detecting capabilities make it superior when compared with other similar products.
公司名稱：深圳華清儀器儀表有限公司
公司電話：0755－28199550、29806349
公司傳真：0755－29806349
熱線電話：13554848522
Q Q:540214533 394688981
址:http://www.huaqing17.cn
- CTS-1002Advanced circuitry 640MHz sampling frequency and 800×480 full WVGA resolution assure quick and accurate display and analysis on defect signals even when the signals are weak.
- Using the advanced tunable square wave excitation technology the CTS-1002 provides excellent penetration and high signal-to-noise ratio when detecting special composite materials highly-attenuated or thick work-pieces.
- 4.3 inches display set-in battery and charger but only 0.9kg in weight which make it easy to operate and carry along.
- The design meets the standard of IP54 certification and compatible with EN 12668:2000 standard.
- With full WVGA TFT display at industrial level this instrument offers fine images at different angles.
- Optimized panel user-friendly design for the menu easy and fast to operate no matter you use the left hand or right hand. Various input modes English/Chinese menu optional.
- Auto-calibration function including fast calibrating material velocity probe delay and probe angle.
- Zoom function for in-gate waveform enables users to observe the waveform detail conveniently. Zoom function for waveform display area and optimized height-to-width rate of the screen ensure echo with higher resolution.
- DAC: Easy to make correct store and recall DAC.
- Built-in intelligent lithium battery charger. Power supplied by battery or AC mains and it can automatically display the power supply modes. Auto switch between “charge” and “work”.
- Long battery life of over 8 hours ensures your continuous work.
- USB port for software updating data transferring and printing and access to devises such as mouse keyboard and U-disk.
- CTS-1002
| CTS-1002Attenuator | Every 12dB ± 1dB |
| CTS-1002Equivalent Input Noise | <80×10-9 V/√HZ |
| CTS-1002Transmitter Pulse | -Ve Square Wave PulseTransmitter Pulse Voltage:25～250V continuously adjustable with 25V increments |
| Test Modes | Pulse echo and dual transmission |
| Damping | 40080 Ohm |
| Frequency | Broadband/narrowband optional.Broadband:0.5～20MHz. Narrowband:1.5～3MHz |
| Gain | 0.0～110.0dB.Steps as 0.1/1.0/2.0/6.0dB |
| Material Velocity | 1000～15000m/s continuously adjustable.Set-in 30 common material velocities selectable |
| Test Range | 0.0～10000mm longitudinal wave at steel velocity. Range continuously variable with minimum 0.1mm increments |
| Rectification | Positive halfwave negative halfwave full wave |
| Alarm | Real-time alarm signal positive and negative thresholds minimum depth DAC alarm optional |
| Measuring Mode：Select peak of pulse wave in gate |
| Display | 4.3" industrial-leveled TFT color LCD with 800×480 WVGA resolution |
| Pulse Shift | -7.5～3000μs |
| Probe Zero | 0～999.9μs |
| Pulse Repetition Frequency | 25～800Hz auto adjustment mode |
| Vertical Linearity Accuracy | ≤3% |
| Horizontal Linearity Accuracy | ≤0.4% |
| Surplus Sensitivity | ≥60dB (200Ф2 flat bottom hole) |
| Resolutions | ≥36dB(5P14) |
| Dynamic Range | ≥32dB |
| Reject | (0～90)% |
| Electric Noise Level | <10% |
| Interface | Q9 transducer cable connectors |
| USB HOST |
| Power Supply | Large-capacity lithium battery without memory effect; Battery Life: More than 8 hours |
| Built-in charger AC Mains 220V |
| Dust/Splash/Water-proof | meets IP54 standard |
| CTS-1002Standards | EN12668-1 compliance |
| Conform to JB/T 10061-1999 standard |
| CTS-1002Environmental Temperature | -30～50℃ |
| CTS-1002Relative Humidity | 20%～95%RH |
| CTS-1002Weight | 0.9Kg (with battery and built-in charger) |
| CTS-1002Dimension | Top：215mm×126mm×53mm |
| bottom：215mm×104mm×42mm |
